Delta AH500 - Page 88

Chapter 2 Specifications and System Configuration
2-55
Analog-to-digital
conversion
Current output
Rated output
range
0 mA~20 mA 4 mA~20 mA
Hardware output
range
-0.2 mA~20.2 mA 3.8 mA~20.2 mA
Fiducial error
(Room
temperature)
±0.06%
Fiducial error (Full
temperature
range)
±0.07%
Linearity error
(Room
temperature)
±0.01%
Linearity error
(Full temperature
range)
±0.01%
Hardware
resolution
16 bits
Permissible load
impedance
<= 550 Ω
 AH06XA-5A
Electrical specifications
Module name
AH06XA-5A
Number of inputs
4
Number of outputs
2
Analog-to-digital
conversion
Voltage input/Current input/Voltage output/Current output
Supply voltage
24 VDC (20.4 VDC~28.8 VDC) (-15%~+20%)
Connector type
Removable terminal block
Conversion time
150 us/channel
Isolation
An analog circuit is isolated from a digital circuit by a digital integrated circuit/an
optocoupler, but the analog channels are not isolated from one another.
Isolation between a digital circuit and a ground: 500 VDC
Isolation between an analog circuit and a ground: 500 VDC
Isolation between an analog circuit and a digital circuit: 500 VDC
Isolation between the 24 VDC and a ground: 500 VDC
Weight 210g
Functional specifications for the analog-to-digital conversion
Analog-to-digital
conversion
Voltage input
Rated input range
-10 V~10 V
0 V~10 V
±5 V
0 V~5 V
1 V~5 V
Hardware input
range
-10.1 V~10.1 V -0.1 V~10.1 V -5.05 V~5.05 V -0.05 V~5.05 V 0.95 V~5.05 V
Fiducial error
(Room
temperature)
±0.1%
Fiducial error (
Full
temperature
range)
±0.45%