Dynon Avionics SkyView HDX - Receive and Send Flight Plans with Pocketfms

MAP and VFR GPS Navigator Operation
SkyView HDX Pilot’s User Guide – Revision B 5-51
• Then open Settings
• Then open the Dynon Wi-Fi Settings menu,
There you can set the Use Dynon Native Wi-Fi to ON.
Once that is completed a new button will appear under the FP tab: This
indicates that EasyVFR is now constantly monitoring your Wi-Fi network to see if a SkyView unit
is announcing its presence. As soon as EASYVFR finds your SkyView, the “waiting” will be
replaced with either “Get” or “send,” depending on if a flight plan is already loaded in EasyVFR
If a flight plan is already loaded in EasyVFR, press "End FP" to first clear the existing EasyVFR
flight plan. Then you may press "Get FP SkyView" to receive SkyView HDX’s flight plan.
Receive and Send Flight Plans with PocketFMS
If no Flight Plan is loaded in EasyVFR and your SkyView unit is detected, the
“Get FP SkyView” button enables you to receive the currently loaded Flight
Plan on SkyView.
If a Flight Plan is loaded in EasyVFR and your SkyView unit is detected, the
“Send FP SkyView” button enables you to send the currently loaded Flight
Plan from EasyVFR to SkyView.
Once SkyView receives the flight plan a confirmation message will appear
on the map and the Flight Plan will be in SkyView HDX’s Flight Plan window. The flight plan can
then be used and edited on SkyView.
Note that flight plans are only updated when you explicitly send or receive them from the
EasyVFR app. This ensures that no flight plan changes are made to either EasyVFR or SkyView
HDX’s flight plan without explicit action by you.