Dynon Avionics SkyView HDX - Inserting a Waypoint

MAP and VFR GPS Navigator Operation
SkyView HDX Pilot’s User Guide – Revision B 5-53
• TOGGLE OVERFLY: Select to toggle the transition type at the selected waypoint from
overfly to flyby or vice versa. An “OF” icon next to the waypoint in the flight plan
denotes that the waypoint will be overflown instead of flown by.
• REVERSE FLIGHT PLAN: Select to reverse the sequence of waypoints in the Flight Plan.
• CLEAR TO END: Select to clear all waypoints from the currently selected waypoint to the
end of the Flight Plan.
• CLEAR FLIGHT PLAN: Select to clear all waypoints from the Flight Plan.
• EXPORT FLIGHT PLAN: Select to export the current Flight Plan to a USB stick memory
stick in GPX format. The filename is automatically generated using the names of the first
and last waypoints. Note that this is different from sending a flight plan to ForeFlight
over Wi-Fi. That action is solely done in the ForeFlight app.
• IMPORT FLIGHT PLAN: Select to open the Flight Plan Import window. The import
window contains a list of all GPX format files that are present on a connected USB flash
drive. Press LOAD to import the currently selected GPX file into the Flight Plan and
activate it. This action will overwrite an existing flight plan. To start at the first waypoint,
press NAVIGATE. To begin navigating on a different leg, use the Flight Plan menu or
Direct-TO to activate the specific leg. Press BACK to exit the Flight Plan Import window
and return to the FPL MENU. Note that this is different from receiving a flight plan from
ForeFlight over Wi-Fi. That action is solely done in the ForeFlight app.
• SHOW SKYVIEW FPL ON MAP or SHOW _EXTERNAL NAVIGATOR_ FPL on MAP: This
option is only available when a compatible external navigation device is installed. Select
this to choose which flight plan appears on SkyView HDX’s moving map. The waypoints
from an external navigator cannot be edited within SkyView.
Inserting a Waypoint
Waypoints can be added from the FPL MENU by selecting INSERT WAYPOINT. This action causes
a window to appear that allows you to select a waypoint by identifier, name, or city. Use the
knob to select a waypoint and press INSERT to initiate the insert mode (see below) or press
CANCEL to cancel the operation and exit the Insert Menu.