Com Radio Operation
9-14 SkyView HDX Pilot’s User Guide – Revision B
Dual Com Radios
If you have more than one Com radio that is capable of communicating with SkyView, only the
primary Com radio’s status information will be displayed in the Top Bar. Additionally, only the
primary radio will receive airports or frequencies from SkyView when SkyView HDX’s TUNE or
APT>COM buttons are used.
However, if your second Com radio is a Dynon Avionics SV-COM-C25, all of its control-panel
based features work just like the primary radio’s. In other words, you can still use the APT
button to load airports, the TWR/GND/ATIS/ATC buttons to tune frequencies, and
airport/station types are reverse-looked up when you manually tune the second radio.
To Next Page
Loading...
