SkyView HDX Display Operation
SkyView HDX Pilot’s User Guide – Revision B 3-9
Configuring the Layout of Your SkyView HDX Display
SkyView HDX displays can be configured to present many combinations of PFD, MAP, and
ENGINE data. Other screen components include the presentation of engine instruments along
the bottom of the screen, and a vertical column of GPS navigational data which can be
displayed on the right or left of the display depending on selected layout options. The process
for selecting and arranging these various screen components is described in detail below.
If your instrument panel contains multiple SkyView HDX displays, the layout of each display can
be configured independently.
SkyView HDX can only display data from installed modules. For example, if an SV-
EMS-220/221 module is not installed, ENGINE and ENGINE BOTTOM BAND will not
be selectable.
In aircraft that have SkyView HDX pre-installed by the aircraft manufacturer, the
SkyView HDX screen layouts may be pre-configured, with changes to the screen
layout restricted. For example, your SkyView HDX display may not offer the option
for the PFD window to not be displayed. Thus for factory-installed SkyView HDX
systems, you may need to contact your aircraft manufacturer to assist you in
changing the screen layout.
To Next Page
Loading...
