Com Radio Operation
9-10 SkyView HDX Pilot’s User Guide – Revision B
Loading Airports via the Control Panel
By Nearest
• Press the APT button once. NRST APT is displayed on the control panel, and the top bar
shows a list of the nearest airports within 75nm of your current location:
• Rotate the small, inner dual concentric knob to the airport you wish to load
• Press the dual concentric knob on the control panel to load the airport to the control
panel (or press APT to cancel your selection)
• Use the TWR, ATIS, GND, and ATC buttons to send the associated airport frequencies to
the standby frequency location.
By A-Z / 0-9 Character Entry
• Press the APT button twice.
To Next Page
Loading...
