Messages and Alerts
SkyView HDX Pilot’s User Guide – Revision B 12-7
Spoken Alert (if
configured)
Message Displayed
in Message
Window
Notification
Area Alert
(severity)
The GPS source that provides GPS
position to the SV-XPNDR-261 for
ADS-B Out use is offline.
System has switched to SkyView
Backup Battery.
A SkyView Display has failed or is
no longer communicating via
SkyView Network.
Magnetic compass heading in
either the SV-ADAHRS-20X or SV-
MAG-236 is not calibrated.
The SkyView Remote
Magnetometer has failed or is no
longer communicating via
SkyView Network.
AOA is not properly calibrated
Airspeed information is not
available; GPS is being used to aid
in the computation of attitude
information; Attitude may be
degraded
Contact Dynon Avionics for
assistance
Autopilot disconnect switch wire
is broken
Autopilot disconnect switch wire
is stuck
Altitude is not being sent to the
SV-XPNDR-261/262 because it is
not available from its nominal
barometric altitude source.
The currently-active ADAHRS has
detected vibration that will affect
G Meter and Autopilot, attitude
indicator performance.
Troubleshoot when able.