Enterasys Matrix E1 1G694-13 User Manual

Port Configuration
Setting Port Trunking
4-34 Matrix E1 Series (1G694-13) Configuration Guide
4.2.10.4 set trunk port
Use this command to add a trunk port to an existing trunk.
set trunk port trunk_name port_string
Syntax Description
Command Defaults
None.
Command Mode
Read-Write.
Example
This example shows how to add Gigabit Ethernet front panel ports 3 through 6 to the “blue” trunk.
trunk_name Specifies the name of the trunk to which the trunk port
will be added.
port_string Specifies the designation of the port to be added to the
trunk. For a detailed description of possible port_string
values, refer to Section 4.1.2.
Matrix>set trunk port blue ge.0.3-6
Port ge.0.3 added to trunk blue.
Port ge.0.4 added to trunk blue.
Port ge.0.5 added to trunk blue.
Port ge.0.6 added to trunk blue.

Enterasys Matrix E1 1G694-13 Specifications

General

Brand	Enterasys
Model	Matrix E1 1G694-13
Category	Switch
Language	English