Spanning Tree Configuration
Reviewing and Setting Spanning Tree Bridge Parameters
5-4 Matrix E1 Series (1G694-13) Configuration Guide
5.2.1.1 show spantree stats
Use this command to display general Spanning Tree information for the device and one or more
ports.
show spantree stats [active | port port_string]
Syntax Description
Command Defaults
If active or port are not specified, no port-specific information will be displayed.
Command Mode
Read-Only.
Examples
This example shows how to display all Spanning Tree information:
active (Optional) Displays only the ports that have received at
least one configuration or RSTP BPDU.
port port_string (Optional) Displays Spanning Tree information for specific
port(s). For a detailed description of possible port_string
values, refer to Section 4.1.2.
Matrix>show spantree stats
Spanning tree - enabled
Designated Root MacAddr - 00:00:1d:47:9d:93
Designated Root Priority - 32768
Designated Root Cost - 2
Designated Root Port - 49
Root Max Age - 20 sec
Root Hello Time - 2 sec
Root Hold Time - 1 sec
Root Forward Delay - 15 sec
Bridge ID Mac Address - 00:01:f4:d2:bc:80
Bridge ID Priority - 32768
Bridge Max Age - 20 sec
Bridge Hello Time - 2 sec
Bridge Forward Delay - 15 sec
Topology Change Count - 73
To Next Page
Loading...
