Enterasys Matrix E1 1G694-13 User Manual

Matrix E1 Series (1G694-13) Configuration Guide 3-1
3
Startup and General Configuration
This chapter describes factory default settings and the Startup and General Configuration set of
commands.
3.1 STARTUP AND GENERAL CONFIGURATION SUMMARY
At startup, the Matrix E1 device is configured with many defaults and standard features. The
following sections provide information on how to review and change factory defaults, and how to
customize basic system settings to adapt to your work environment.
3.1.1 Factory Default Settings
Table 3-1 lists factory default device settings available on the Matrix E1.
.
Table 3-1 Factory Default Device Settings
Device Feature Default Setting
CDP Auto enabled on all ports.
CDP interval Transmit frequency of CDP messages set to 60 seconds.
Community name Public.
GVRP Globally disabled. Enabled on all ports.
GVRP timer Join timer set to 20, leave timer set to 60, leaveall timer set to 1000
(centiseconds).
Host VLAN Assigned to default (VID 1) VLAN.
IGMP Disabled.
IP mask Set to 255.255.0.0.

Enterasys Matrix E1 1G694-13 Specifications

General

Brand	Enterasys
Model	Matrix E1 1G694-13
Category	Switch
Language	English