Enterasys Matrix E1 1G694-13 User Manual

Spanning Tree Configuration
Reviewing and Setting Spanning Tree Bridge Parameters
5-10 Matrix E1 Series (1G694-13) Configuration Guide
5.2.1.5 set spantree priority
Use this command to set the device’s Spanning Tree priority. The device with the highest priority
becomes the Spanning Tree root device. If all devices have the same priority, the device with the
lowest MAC address will then become the root device.
set spantree priority bridge_priority
Syntax Description
Command Defaults
None.
Command Mode
Read-Write.
Example
This example shows how to set the bridge priority to 4096:
bridge_priority Specifies the priority of the bridge. Valid values are
from 0 to 61440 (in increments of 4096), with 0
indicating high priority and 61440 low priority.
Matrix>set spantree priority 4096
Spanning Tree priority set to 4096.

Enterasys Matrix E1 1G694-13 Specifications

General

Brand	Enterasys
Model	Matrix E1 1G694-13
Category	Switch
Language	English