Enterasys Matrix E1 1G694-13 - Set Jumbo

Port Configuration
Enabling / Disabling Jumbo Frame Support
4-22 Matrix E1 Series (1G694-13) Configuration Guide
4.2.5.2 set jumbo
Use this command to enable or disable jumbo frame support on the device.
set jumbo {enable | disable}
Syntax Description
Command Defaults
None.
Command Mode
Read-Write.
Example
This example shows how to enable jumbo frame support on the device:
enable | disable Enables or disables jumbo frame support.
Matrix>set jumbo enable
Jumbo frames enabled.