Port Priority Configuration
Configuring Port Priority
Matrix E1 Series (1G694-13) Configuration Guide 7-3
7.2.1.1 show port priority
Use this command to view the 802.1D priority of a port.
show port priority [port_string]
Syntax Description
Command Defaults
If port_string is not specified, port priority for all ports will be displayed.
Command Mode
Read-Only.
Example
This example shows how to display the port priority for the Gigabit Ethernet front panel port 11.
In
this case, the priority is 5.
port_string (Optional) Specifies the port for which to display priority
information. For a detailed description of possible
port_string values, refer to Section 4.1.2.
Matrix>show port priority ge.0.11
Port ge.0.11 has port priority 5.
To Next Page
Loading...
