Enterasys Matrix E1 1G694-13

802.1Q VLAN Configuration
Assigning Port VLAN IDs (PVIDs) and Ingress Filtering
Matrix E1 Series (1G694-13) Configuration Guide 6-15
6.2.3.3 clear port vlan
Use this command to reset the port’s 802.1Q port VLAN ID to the host VLAN ID 1.
clear port vlan port_string
Syntax Description
Command Defaults
None.
Command Mode
Read-Write.
Example
This example shows how to reset the Gigabit Ethernet front panel ports 3 and 11 to a VLAN ID of
1 (default VLAN).
port_string Specifies the port(s) to be reset to the host VLAN ID 1. For
a detailed description of possible port_string values, refer
to Section 4.1.2.
Matrix>clear port vlan ge.0.3,ge.0.11
Port VLAN index reset to 1 for port ge.0.3
Port VLAN index reset to 1 for port ge.0.11