Enterasys Matrix E1 1G694-13

Spanning Tree Configuration
Reviewing and Setting Spanning Tree Port Parameters
5-32 Matrix E1 Series (1G694-13) Configuration Guide
5.2.2.7 show spantree adminedge
Use this command to display the edge port administrative status for a port.
show spantree adminedge port_string
Syntax Description
Command Defaults
None.
Command Mode
Read-Only.
Example
This example shows how to display the edge port status for front panel port 3:
port_string Specifies the port(s) for which to display edge
port administrative status. For a detailed
description of possible port_string values, refer
to Section 4.1.2
.
Matrix>show spantree adminedge ge.0.3
admin edge = TRUE for port ge.0.3