802.1Q VLAN Configuration
Creating and Naming Static VLANs
Matrix E1 Series (1G694-13) Configuration Guide 6-7
6.2.2 Creating and Naming Static VLANs
Purpose
To create a new static VLAN, or enable/disable the new or other existing static VLAN.
Commands
The commands needed to establish new or remove VLANs are listed below and described in the
associated section as shown.
• set vlan (Section 6.2.2.1)
• set vlan name (Section 6.2.2.2)
• clear vlan (Section 6.2.2.3)
• clear vlan name (Section 6.2.2.4)