Enterasys Matrix E1 1G694-13

Startup and General Configuration
Setting Basic System Information
3-14 Matrix E1 Series (1G694-13) Configuration Guide
3.2.2.3 set time
Use this command to change the time of day on the system clock.
set time [day_of_week][mm/dd/yyyy][hh:mm:ss]
Syntax Description
Command Defaults
This command has no default setting.
Command Mode
Read-Write.
Example
This example shows how to set the system clock to Saturday, October 31, 2003, 7:50 a.m:
day_of_week (Optional) Specifies the day of the week.
mm/dd/yyyy (Optional) Specifies the month, day, and year.
hh:mm:ss (Optional) Specifies the current time in 24-hour format.
Matrix>set time sat 10/31/2003 7:50
Sat Oct 31 1998, 07:50:00