Network Management
Monitoring Network Events and Status
Matrix E1 Series (1G694-13) Configuration Guide 9-23
9.2.2.11 disconnect
Use this command to close an active console port or Telnet session.
disconnect {A.B.C.D | console}
Syntax Description
Command Defaults
None.
Command Mode
Read-Write.
Examples
This example shows how to close a Telnet session to host 10.1.10.10:
This example shows how to close the current console session:
A.B.C.D Specifies the IP address of the Telnet session to be
disconnected. This address is displayed in the output
shown in Section 9.2.2.10.
console Closes an active console port.
Matrix>disconnect 10.1.10.10
Telnet session from 10.1.10.10 disconnected.
Matrix>disconnect console
Console session disconnected.
To Next Page
Loading...
Need help?
General