Enterasys Matrix E1 1G694-13

Network Management
Managing Network Addresses and Routes
Matrix E1 Series (1G694-13) Configuration Guide 9-25
9.2.3.1 show arp
Use this command to display the device’s ARP table.
show arp
Syntax Description
None.
Command Defaults
None.
Command Mode
Read-Only.
Example
This example shows how to display the ARP table:
Matrix>show arp
LINK LEVEL ARP TABLE
destination gateway flags Refcnt Use Interface
--------------------------------------------------------------------------
10.1.0.1 00:00:1d:bc:df:bf 405 1 0 host0
10.1.10.10 00:00:1d:1f:27:26 405 0 11338 host0
--------------------------------------------------------------------------