802.1Q VLAN Configuration
Creating and Naming Static VLANs
Matrix E1 Series (1G694-13) Configuration Guide 6-9
6.2.2.2 set vlan name
Use this command to set the ASCII name for a new or existing VLAN.
set vlan name vlan_id vlan_name
Syntax Description
Command Defaults
None.
Command Mode
Read-Write.
Example
This example shows how to set the name for VLAN 7 to green:
NOTES: Each VLAN ID must be unique. If a duplicate VLAN ID is entered, the switch
assumes that the administrator intends to modify the existing VLAN.
Enter the VLAN ID using a unique number between 1 and 4094. The VLAN IDs of 4095
and higher may not be used for user-defined VLANs.
vlan_id Specifies the number of the VLAN to be named.
vlan_name Specifies the string used as the name of the VLAN (1 to 32
characters).
Matrix>set vlan name 7 green
VLAN 7 name set to green.
To Next Page
Loading...
