Port Configuration
Setting Port Trunking
4-32 Matrix E1 Series (1G694-13) Configuration Guide
4.2.10.2 set trunk
Use this command to create, enable and disable trunks.
set trunk trunk_name {create | disable | enable}
Syntax Description
Command Defaults
None.
Command Mode
Read-Write.
Example
This example shows how to create a trunk named “blue”:
trunk_name Specifies the name of the trunk port to be created,
disabled or enabled.
create | disable |
enable
Creates, disables or enables a trunk with the specified
name.
Matrix>set trunk blue create
Successful trunking operation for blue.
To Next Page
Loading...
Need help?
General