Spanning Tree Configuration
Reviewing and Setting Spanning Tree Port Parameters
5-34 Matrix E1 Series (1G694-13) Configuration Guide
5.2.2.9 show spantree adminpoint
Use this command to display the administrative point-to-point status of the LAN segment attached
to a port.
show spantree adminpoint port_string
Syntax Description
Command Defaults
None.
Command Mode
Read-Only.
Example
This example shows how to display the point-to-point status of the LAN segment attached to front
panel port 3:
port_string Specifies the port(s) for which to display point-to-point
status. For a detailed description of possible port_string
values, refer to Section 4.1.2.
Matrix>show spantree adminpoint ge.0.3
admin point-to-point = AUTO for port ge.0.3
To Next Page
Loading...
Need help?
General