Enterasys Matrix E1 1G694-13

Port Configuration
Process Overview: Port Configuration
Matrix E1 Series (1G694-13) Configuration Guide 4-5
4.1.3 Process Overview: Port Configuration
Use the following steps as a guide in the port configuration process:
1. Reviewing port status (Section 4.2.1)
2. Disabling / enabling ports (Section 4.2.2)
3. Setting auto negotiation (Section 4.2.3)
4. Setting flow control (Section 4.2.4)
5. Enabling / disabling jumbo frame support (Section 4.2.5)
6. Setting port traps (Section 4.2.6)
7. Setting port mirroring (Section 4.2.7)
8. Setting port trunking (Section 4.2.9)