Spanning Tree Configuration
Reviewing and Setting Spanning Tree Bridge Parameters
5-14 Matrix E1 Series (1G694-13) Configuration Guide
5.2.1.9 show spantree edgeportdelay
Use this command to display the status of the Spanning Tree edge port delay function.
show spantree edgeportdelay
Syntax Description
None.
Command Defaults
None.
Command Mode
Read-Only.
Example
This example shows how to display the status of the edge port delay function:
Matrix>show spantree edgeportdelay
Edge port delay is currently enabled.
To Next Page
Loading...
Need help?
General