802.1Q VLAN Configuration
Creating and Naming Static VLANs
6-10 Matrix E1 Series (1G694-13) Configuration Guide
6.2.2.3 clear vlan
Use this command to remove a static VLAN from the list of VLANs recognized by the device.
clear vlan vlan_id
Syntax Description
Command Defaults
None.
Command Mode
Read-Write.
Example
This example shows how to remove a static VLAN 9 from the device’s VLAN list.
vlan_id Specifies the number of the VLAN to be removed.
Matrix>clear vlan 9
VLAN 9 removed.
To Next Page
Loading...
Need help?
General