Enterasys Matrix E1 1G694-13 User Manual

Port Configuration
Setting Flow Control
Matrix E1 Series (1G694-13) Configuration Guide 4-19
4.2.4.2 set port flowcontrol
Use this command to enable or disable flow control for one or more ports.
set port flowcontrol port_string {disable | enable}
Syntax Description
Command Defaults
None.
Command Mode
Read-Write.
Example
This example shows how to enable flow control on Gigabit Ethernet front panel ports 1 through 4:
port_string Specifies the port(s) for which flow control will be enabled
or disabled. For a detailed description of possible
port_string values, refer to Section 4.1.2.
disable | enable Disables or enables flow control.
Matrix>set port flowcontrol ge.0.1-4 enable
Port flow control enabled for port ge.0.1.
Port flow control enabled for port ge.0.2.
Port flow control enabled for port ge.0.3.
Port flow control enabled for port ge.0.4.

Enterasys Matrix E1 1G694-13 Specifications

General

Brand	Enterasys
Model	Matrix E1 1G694-13
Category	Switch
Language	English