Enterasys Matrix E1 1G694-13

802.1Q VLAN Configuration
Setting the Host VLAN
Matrix E1 Series (1G694-13) Configuration Guide 6-21
6.2.5 Setting the Host VLAN
Purpose
To assign the host port on the switch to a VLAN that only select devices are allowed to access. This
secures the host port. This is useful, for example, in restricting the configuration of the devices in
the system to a limited number of users.
Commands
The commands needed to configure host VLANs are listed below and described in the associated
section as shown.
• show host vlan (Section 6.2.5.1)
• set host vlan (Section 6.2.5.2)
• clear host vlan (Section 6.2.5.3)
NOTE: The host port is the management entity of the switch.