Port Priority Configuration
Configuring Port Priority
7-4 Matrix E1 Series (1G694-13) Configuration Guide
7.2.1.2 set port priority
Use this command to set the priority (0 through 7) on each port. A port receiving a frame without
priority information in its tag header is assigned a priority according to the priority setting on the
port. For example, if the priority of a port is set to 5, the frames received through that port without
a priority indicated in their tag header are classified as a priority 5.
A frame with priority information in its tag header is transmitted according to that priority.
set port priority port_string priority
Syntax Description
Command Defaults
None.
Command Mode
Read-Write.
Example
This example shows how to set a default priority of 6 on Gigabit Ethernet front panel port 3. Frames
received by port 3 without priority information in their frame header are set to the default setting of
6.
port_string Specifies the port for which to set priority. For a detailed
description of possible port_string values, refer to
Section 4.1.2.
priority Specifies a value of 0 - 7 to set the 802.1D port priority for
the port entered in the port_string. Port priority value of 0 is
the lowest priority.
Matrix>set port priority ge.0.3 6
Port priority set to 6 for port ge.0.3
To Next Page
Loading...
