Enterasys Matrix E1 1G694-13

IGMP Configuration
Enabling / Disabling IGMP
8-2 Matrix E1 Series (1G694-13) Configuration Guide
8.2 IGMP CONFIGURATION COMMAND SET
8.2.1 Enabling / Disabling IGMP
Purpose
To display IGMP status and to enable or disable IGMP snooping on the switch.
Commands
The commands needed to display, enable and disable IGMP are listed below and described in the
associated sections as shown.
• show igmp (Section 8.2.1.1)
• set igmp (Section 8.2.1.2)