Enterasys Matrix E1 1G694-13

Port Configuration
Setting Port Trunking
Matrix E1 Series (1G694-13) Configuration Guide 4-35
4.2.10.5 clear trunk port
Use this command to remove a port from a trunk.
clear trunk port trunk_name priority_string
Syntax Description
Command Defaults
None.
Command Mode
Read-Write.
Example
This example shows how to delete Gigabit Ethernet front panel ports 5 through 7 from the “blue”
trunk.
trunk_name Specifies the name of the trunk from which the port will
be removed.
port_string Specifies the designation of the port to be removed from
the trunk. For a detailed description of possible
port_string values, refer to Section 4.1.2.
Matrix>clear trunk port blue ge.0.5-7
Port ge.0.5 deleted for trunk blue.
Port ge.0.6 deleted for trunk blue.
Port ge.0.7 deleted for trunk blue.