Network Management
Monitoring Network Events and Status
Matrix E1 Series (1G694-13) Configuration Guide 9-19
9.2.2.9 show rmon stats
Use this command to display RMON statistics for a port or range of ports.
show rmon stats [port_string]
Syntax Description
Command Defaults
If port_string is not specified, RMON stats will be displayed for all ports.
Command Mode
Read-Only.
Example
This example shows how to display RMON statistics for the 10-Gigabit Ethernet expansion
module 1, port 1:
Table 9-3 provides a detailed explanation of the command output.
port_string (Optional) Specifies the port(s) for which to show RMON
statistics. For a detailed description of possible port_string
values, refer to Section 4.1.2
Matrix>show rmon stats tg.1.1
Index 1
--------------------
Status = 1 (active)
Owner =
Data Source =
Drop Events = 5 Jabbers = 515
Collisions = 230 Octets = 12455
Packets = 12164 0 - 64 Octets = 1894
Broadcast Pkts = 1894 65 - 127 Octets = 732
Multicast Pkts = 732 128 - 255 Octets = 541
CRC Errors = 35 256 - 511 Octets = 21
Undersize Pkts = 80 512 - 1023 Octets = 8943
Oversize Pkts = 5 1024 - 1518 Octets = 33
Fragments = 0
To Next Page
Loading...
Need help?
General