Spanning Tree Configuration
Reviewing and Setting Spanning Tree Bridge Parameters
5-16 Matrix E1 Series (1G694-13) Configuration Guide
5.2.1.11 show spantree legacypathcost
Use this command to display the status of the legacy (802.1D) path cost setting.
show spantree legacypathcost
Syntax Description
None.
Command Defaults
None.
Command Mode
Read-Only.
Example
This example shows how to display the status of the legacy path cost setting:
Matrix>show spantree legacypathcost
Legacy path cost is currently enabled.
To Next Page
Loading...
Need help?
General