Enterasys Matrix E1 1G694-13

Startup and General Configuration
Setting Basic System Information
3-18 Matrix E1 Series (1G694-13) Configuration Guide
3.2.2.7 set system contact
Use this command to identify a contact person for the system.
set system contact “contact_string”
Syntax Description
Command Defaults
None.
Command Mode
Read-Write.
Example
This example shows how to set the system contact string:
contact_string Specifies a text string that contains the name of the
person to contact for system administration. A contact
string containing a space in the text must be enclosed in
quotes as shown in the example below.
Matrix>set system contact “Joe Smith”
System contact set.