Port Priority Configuration
Process Overview: Port Priority Configuration
7-2 Matrix E1 Series (1G694-13) Configuration Guide
7.1.2 Process Overview: Port Priority Configuration
Use the following steps as a guide in the port priority configuration process:.
1. Configuring Port Priority (Section 7.2.1)
2. Configuring Priority Queueing (Section 7.2.2)
3. Configuring Quality of Service (QoS) (Section 7.2.3)
7.2 PORT PRIORITY CONFIGURATION COMMAND SET
7.2.1 Configuring Port Priority
Purpose
To display or change the port default transmit priority (0 through 7) of each port for frames that are
received (ingress) without priority information in their tag header.
Commands
The commands to configure port priority are listed below and described in the associated section.
• show port priority (Section 7.2.2.1)
• set port priority (Section 7.2.1.2)
• clear port priority (Section 7.2.1.3)
To Next Page
Loading...
