Enterasys Matrix E1 1G694-13 User Manual

Port Configuration
Setting Port Traps
4-24 Matrix E1 Series (1G694-13) Configuration Guide
4.2.6.1 show port trap
Use this command to display the status of an SNMP link trap on one or more ports.
show port trap [port_string]
Syntax Description
Command Defaults
If no port_string is specified, the trap status for all ports is displayed.
Command Mode
Read-Write.
Examples
This example shows how to display SNMP link trap status for Gigabit Ethernet front panel ports 1
through 3:
This example shows how to display SNMP link trap status for all ports:
port_string (Optional) Specifies the port(s) for which trap status will be
displayed. For a detailed description of possible port_string
values, refer to Section 4.1.2.
Matrix>show port trap ge.0.1-3
Port State
--------- ---------
ge.0.1 enabled
ge.0.2 enabled
ge.0.3 enabled
Matrix>show port trap
Port State Port State Port State
--------- --------- --------- --------- --------- ---------
ge.0.1 enabled ge.0.2 enabled ge.0.3 enabled
ge.0.4 enabled ge.0.5 enabled ge.0.6 enabled
ge.0.7 enabled ge.0.8 enabled ge.0.9 enabled
ge.0.10 enabled ge.0.11 enabled ge.0.12 enabled

Enterasys Matrix E1 1G694-13 Specifications

General

Brand	Enterasys
Model	Matrix E1 1G694-13
Category	Switch
Language	English

Summary

Program License Agreement

Introduction

Overview of CLI Interface

Introduces the Matrix E1 CLI and its capabilities for network management.

Local Management Requirements

Details the systems and connections needed for local management via the console port.

Getting Technical Support

Provides contact methods and information required for technical assistance.

Setup Requirements

Connecting to Console Port for Local Management

Describes connecting a PC, VT terminal, or modem to the host device's console port.

Using a Telnet Connection

Provides guidelines for establishing a Telnet connection to access the CLI management interface.

Startup and General Configuration

Startup and General Configuration Summary

Covers factory defaults and basic system settings for adapting the work environment.

General Configuration Command Set

Details commands for setting login password, system information, firmware, community names, and traps.

Port Configuration

Port Configuration Summary

Explains the device's fixed and optional Ethernet ports and their numbering scheme.

Port Configuration Command Set

Covers commands for reviewing port status, enabling/disabling ports, auto-negotiation, flow control, traps, mirroring, and trunking.

Spanning Tree Configuration

Spanning Tree Configuration Summary

Introduces STP/RSTP, their functions, and how the device implements them.

Spanning Tree Configuration Command Set

Details commands for configuring Spanning Tree bridge and port parameters.

802.1Q VLAN Configuration

VLAN Configuration Summary

Explains logical grouping of devices into VLANs and their configuration.

VLAN Configuration Command Set

Covers commands for reviewing, creating, naming, assigning, and managing VLANs and GVRP.

Port Priority Configuration

Port Priority Configuration Summary

Details Class of Service (CoS) and priority queueing mechanisms based on IEEE 802.1D.

Port Priority Configuration Command Set

Covers commands for configuring port priority, queue mapping, and Quality of Service (QoS).

IGMP Configuration

Multicast Filtering Configuration Summary

Explains multicasting, IGMP, and its role in filtering traffic for subscribed hosts.

IGMP Configuration Command Set

Details commands for enabling/disabling IGMP, setting query count/report delay, and reviewing groups.

Network Management

Process Overview: Network Management

Outlines tasks for managing device settings, monitoring events, and handling network addresses/routes.

Network Management Command Set

Covers commands for general device settings, monitoring, and managing network addresses and routes.

Matrix E1 CLI Quick Reference Guide

Overview of Quick Reference Guide

Introduces the quick reference guide and its purpose.

CLI Tasks, Commands, and Syntax

Lists CLI tasks, their command functions, and syntax for quick reference.