Enterasys Matrix E1 1G694-13

Network Management
Managing Network Addresses and Routes
9-24 Matrix E1 Series (1G694-13) Configuration Guide
9.2.3 Managing Network Addresses and Routes
Purpose
To display, add or delete ARP table entries, to display, add or delete IP routing table addresses, and
to display or delete MAC address information.
Commands
Commands to manage network addresses and routes are listed below and described in the
associated section as shown.
• show arp (Section 9.2.3.1)
• set arp (Section 9.2.3.2)
• clear arp (Section 9.2.3.3)
• show ip route (Section 9.2.3.4)
• set ip route (Section 9.2.3.5)
• clear ip route (Section 9.2.3.6)
• show mac (Section 9.2.3.7)
• clear mac (Section 9.2.3.8)