Enterasys Matrix E1 1G694-13 User Manual

802.1Q VLAN Configuration
Assigning Port VLAN IDs (PVIDs) and Ingress Filtering
6-14 Matrix E1 Series (1G694-13) Configuration Guide
6.2.3.2 set port vlan
Use this command to configure the port VLAN identifier (vlan_id) for a single port or a range of
ports.
set port vlan port_string vlan_id
Syntax Description
Command Defaults
None.
Command Mode
Read-Write.
Example
This example shows how to add Gigabit Ethernet front panel ports 1 through 5 to the port VLAN
list of VLAN 5.
port_string Specifies the port(s) for which to configure a VLAN
identifier. For a detailed description of possible port_string
values, refer to Section 4.1.2.
vlan_id Specifies the number identifying the VLAN to which
port(s) will be added.
Matrix>set port vlan ge.0.1-5 5
Ports 1 through 5 have been set with a vlan Id of 5.

Enterasys Matrix E1 1G694-13 Specifications

General

Brand	Enterasys
Model	Matrix E1 1G694-13
Category	Switch
Language	English