Enterasys Matrix E1 1G694-13

Startup and General Configuration
Setting Basic System Information
Matrix E1 Series (1G694-13) Configuration Guide 3-17
3.2.2.6 set system location
Use this command to identify the location of the system.
set system location “location_string”
Syntax Description
Command Defaults
None.
Command Mode
Read-Write.
Example
This example shows how to set the system location string:
location_string Specifies a text string that indicates where the system is
located. A location string containing a space in the text
must be enclosed in quotes as shown in the example
below.
Matrix>set system location “Bldg N32-04 Closet 9 Alpha Sierra”
System location set.