Enterasys Matrix E1 1G694-13

Port Configuration
Disabling / Enabling Ports
4-12 Matrix E1 Series (1G694-13) Configuration Guide
4.2.2.1 set port disable
Use this command to administratively disable one or more ports.
set port disable port_string
Syntax Description
Command Defaults
None.
Command Mode
Read-Write.
Example
This example shows how to disable Gigabit Ethernet front panel port 1:
port_string Specifies the port to disable. For a detailed description of
possible port_string values, refer to Section 4.1.2.
Matrix>set port disable ge.0.1
Port ge.0.1 is administratively disabled.