802.1Q VLAN Configuration
Configuring the VLAN Egress List
6-20 Matrix E1 Series (1G694-13) Configuration Guide
6.2.4.2 clear vlan egress
Use this command to remove ports from a VLAN’s egress list.
clear vlan egress vlan_id port_string
Syntax Description
Command Defaults
None.
Command Mode
Read-Write.
Example
This example shows how to remove Gigabit Ethernet front panel port 5 from the egress list of
VLAN 1.
vlan_id Specifies the number of the VLAN from which port(s) will
be removed from the egress list.
port_string Specifies one or more ports to be removed from the VLAN
egress list of the specified vlan_id. For a detailed
description of possible port_string values, refer to
Section 4.1.2.
Matrix>clear vlan egress 1 ge.0.5
Vlan 1 cleared on port ge.0.5.