Enterasys Matrix E1 1G694-13

Port Configuration
Port String Syntax Used in the CLI
4-4 Matrix E1 Series (1G694-13) Configuration Guide
Examples
This example shows the port_string syntax for specifying Gigabit Ethernet port 3 in the device’s
fixed front panel.
This example shows the port_string syntax for specifying Gigabit Ethernet ports 1 through 10 in
the device’s fixed front panel.
This example shows the port_string syntax for specifying Gigabit Ethernet ports 1, 3, 7, 8, 9 and
10 in the device’s left expansion module slot.
This example shows the port_string syntax for specifying the 10-Gigabit Ethernet port 1 in the
device’s expansion module slot.
This example shows the port_string syntax for specifying all Gigabit Ethernet ports in the device.
This example shows the port_string syntax for specifying all ports (of any interface type) in the
device.
ge.0.3
ge.0.1-10
ge.1.1,ge.1.3,ge.1.7-10
tg.1.1
ge.*.*
*.*.*