Enterasys Matrix E1 1G694-13

Port Configuration
Reviewing Port Status
4-10 Matrix E1 Series (1G694-13) Configuration Guide
This example shows how to display all port counter statistics related to traffic through the switch
device.
Table 4-3 provides an explanation of the command output.
Matrix>show port counters ge.0.1
Port: ge.0.1 Bridge Port: 1
---------------------------------------
MIB2 Interface Counters:
In Octets: 0
In Unicast Pkts: 0
In Multicast Pkts: 0
In Broadcast Pkts: 0
In Discards: 0
In Errors: 0
In Unknown Protocol: 0
Out Octets: 0
Out Unicast Pkts: 0
Out Multicast Pkts: 0
Out Broadcast Pkts: 0
Out Discards: 0
Out Errors: 0
Out Queue Length: 0
802.1Q Switch Counters:
Frames Received: 0
Frames Transmitted: 0
Matrix>show port counters ge.0.1 switch
Port: ge.0.1 Bridge Port: 1
802.1Q Switch Counters:
----------------------
Frames Received: 0
Frames Transmitted: 0