FS TAP Series User Manual

TAP Series Switch Command Line Reference
101
Command Syntax
port-channel load-balance hash-arithmetic (crc| xor)
no port-channel load-balance hash-arithmetic
crc
Use algorithm of crc to compute hash value
xor
Use algorithm of exclusive or to compute hash
value
Command Mode
Global Configuration
Default
xor
Usage
Use this command to configure the load balance hash algorithm for the Link Aggregation
Control Protocol (LACP).
Use the no form of this command to restore the default value.
Examples
This example shows how to configure the load balance hash algorithm for Link Aggregation
Control Protocol (LACP):
Switch(config)# port-channel load-balance hash-arithmetic xor
Related Commands
port-channel load-balance
9.7 port-channel load-balance set
Use this command to configure the load balance type for the Link Aggregation Control
Protocol (LACP).
Use the no form of this command to delete a load balance type or restore the default value.

FS TAP Series Specifications

General

Brand	FS
Model	TAP Series
Category	Switch
Language	English