TAP Series Switch Command Line Reference
17.1 show diagnostic-information
Use this command to display the diagnostic information of the system.
Command Syntax
show diagnostic-information
Command Mode
Privileged EXEC
Default
None
Usage
Diagnostic information includes “show version” information, “show clock” information, etc.
The result is usually very long and user can print the result into a file on the flash.
Examples
The following example shows how to display the diagnostic information
Switch# show diagnostic-information
------------------ show version ------------------
FS i-Ware Software, Version 1.10, ESS 6601 01
Copyright(C) 2004-2017 New FS Technologies Co., Ltd. All rights Reserved
FS SecPath FW uptime is 0 weeks, 0 day, 14 hours, 4 minutes
Boot image: flash:/boot/SecPathTAP2000A-IMW110-E6601.BIN.03
Boot image version: 1.10, ESS 6601 01
Next running image : flash:/boot/SecPathTAP2000A-IMW110-E6601.BIN.03
To Next Page
Loading...
