FS TAP Series

TAP Series Switch Command Line Reference
327
19.6 show system summary
Use this command to show the summary of system information.
Command Syntax
show system summary
Command Mode
Privileged EXEC
Default
None
Usage
This command to show the summary of system information.
Examples
This example shows how to display the summary of system information.
Switch# show system summary
########## Version Table ##########
FS i-Ware Software, Version 1.10, ESS 6601 01
Copyright(C) 2004-2017 New FS Technologies Co., Ltd. All rights Reserved
FS SecPath FW uptime is 0 weeks, 0 day, 0 hours, 52 minutes
Boot image: flash:/boot/SecPathTAP2000A-IMW110-E6601.BIN.03
Boot image version: 1.10, ESS 6601 01
Next running image : flash:/boot/SecPathTAP2000A-IMW110-E6601.BIN.03
SLOT 1
Hardware Type : CTC5160(GreatBelt) based switch
SDRAM size : 1024M
Flash size : 2048M
Hardware Version : 2.0
EPLD Version : 1.2
BootRom Version : 8.1.3
System serial number : E142GD16107A
########## Management IP Table ##########
Management IP address: 10.10.39.104/23
Gateway: 10.10.39.254
########## Route Mac Table ##########
Route MAC is: 001e.080b.e6c2