FS TAP Series

TAP Series Switch Command Line Reference
137
Switch(config)# no logging server address mgmt-if 10.10.38.236
Related Commands
logging server
12.17 logging merge
To enable the logging mergence, use the logging merge command in Global Configuration
mode.
Use the no form of this command to restore the default value.
Command Syntax
logging merge (enable| disable| timeout MERGETIMEOUT|fifo-size MERGEFSIZE)
enable
Enable logging mergence
disable
Disable logging mergence
fifo-size MERGEFSIZE
Set fifo size. The range is 100 to 10240,
default value is 1024
timeout MERGETIMEOUT
Set timeout. The range is 1 to 300 seconds,
default value is 10 seconds
Command Mode
Global Configuration
Default
Logging mergence is enabled. Default timeout is 10, range is 1 to 300, default fifo-size is 1024,
and range is 100 to 10240.