FS TAP Series

TAP Series Switch Command Line Reference
222
Command Syntax
speed ( 115200| 57600| 38400| 19200| 9600| 4800| 2400| 1200| 600)
no speed
Command Mode
Line-CON
Default
115200 for T5800_TAP
9600 for T5850 & T8050_TAP
Usage
Use this command to set the transmit and receive speeds of console terminal.
Use the no form of this command to restore the default value.
Examples
The following is an example of set console terminal speed to 115200:
Switch(config)# line console 0
Switch(config-line)# speed 115200
The following is an example of set console terminal speed to default value
Switch(config)# line console 0
Switch(config-line)# no speed
Related Commands
show console
14.64 authorization exec
Use this command to enable authentication, authorization, accounting (AAA) authorization
for logins.
Use the no form of this command to restore the default value.