FS TAP Series

TAP Series Switch Command Line Reference
27
Related Commands
show interface
1.16 media-type
Use this command to set media type of combo port.
Command Syntax
media-type (auto| rj45| sfp)
auto
Automatically select media type of combo
port
rj45
Set media type as rj45
sfp
Set media type as sfp
Command Mode
Interface Configuration
Default
auto
Usage
Use this command to set media type of combo port. Different media type of the combo port
cannot be active at the same time.
Examples
This example shows how to set media type of combo port:
Switch(config-if-eth-0-1) media-type auto
Switch(config-if-eth-0-1) media-type rj45
Switch(config-if-eth-0-1) media-type sfp
Related Commands
show interface