FS TAP Series

TAP Series Switch Command Line Reference
185
Command Mode
RSA-key
Default
The default key format is DER.
Usage
Use the key format command to specify the key format.
Examples
The following example specifies the key format of KEY1 as pem:
Switch(config)# rsa key KEY1
Switch(config-rsa-key)# key format pem
Related Commands
rsa key
14.28 key string end
Use this command to exit the rsa key configuration mode and apply all rsa key configurations.
After using this command, the current command mode should be global configuration mode.
Command Syntax
key string end
Command Mode
RSA-key
Default
None