FS TAP Series

TAP Series Switch Command Line Reference
306
Default
None
Usage
Use this command to show utilizations of cpu.
Examples
The following is sample output from the show cpu utilization command:
Switch# show cpu utilization
Process Usage(%)
--------------------+----------
python 3.42
fea 2.62
switch 0.20
appcfg 0.10
cds 0.10
snmpd 0.10
ccs 0.10
kworker 0.10
Others 5.55
-------------------------------
Total 12.29
Related Commands
None
18.15 terminal length
Use this command to set number of terminal lines on a screen. Range is 0 to 512.
Use the no form of this command to restore the default value.
Command Syntax
terminal length TERM_LINES
terminal no length
TERM_LINES
Number of lines on screen (0 for no pausing)